Mislim da je to - nisam siguran - radi¹ na svoju odgovornost.
Inside the device's ROM there is a file called "ST.exe" that is called at
startup by a regisrty key. Actually there are two revisions: One starts the
navigation at once, the other calls the "3-button-menu-screen". Hitting the
"Navigation"-tab calls the "MNAVDCE.exe"-file inside the "Medion"-folder. We
will "hijack" this routine and call another program for our purposes by
simply exchanging file-names.
a.. registry-editor - the PHM registry editor, Handheld PC Edition ARM
will fit. Freeware, download at http://www.phm.lu/Products/Embedded/
b.. TotalCommander for WindowsCE - freeware, download at
c.. Showtaskbar by Gábor Kovács - freeware, download at
e.. AC-adaptor for MDPNA 150
f.. PC with ActiveSync
a.. First of all you should connect your MDPNA to the AC-Adaptor to
prevent abort of installation due to low battery.
b.. Open explorer and copy the file RegEdit.Jup_ARM.cab onto the device's
storacecard. Leave it there, we will use it later.
c.. Install TotalCommander for WinCE (Make sure NOT to install it into the
default memory for application. Say NO when asked and use the storagecard
instead! On the MDPNA-screen a warning will pop up, saying, that this
release may not work on your device - override this warning and install it
anyway. Finish the installation process by pressing the jog button.)
d.. Copy the (downloaded and extracted)"showtaskbar.exe"-file into the
e.. Search for the installed "cecmd.exe"-file (TotalCommander-folder on
the storagecard) and copy it into the device's "\Medion"-folder.
f.. This one is tricky: Exchange the file-names of "MNAVDCE.exe" and
g.. Create a subfolder below "\Storage Card\Medion" named "Desktop"
anlegen. It must contain two textfiles named "WCE.TXT" and "POI.INI", to be
recognized as a regular map-folder by the system.
h.. Here we go now: Disconnect PNA from PC and exit the
navigation-program. You may do this either using the green exit-hook or
using the "choose map" option and select the "Desktop"-map, we created one
step earlier - depending on the software-release you're using.
i.. Startup-screen shows up and Totalcommander will be started, when
hitting the "Navigation"-tab. Users without startup-screen perform a
soft-reset, using the unscrewed stylus head sticking into the small
reset-hole on the left side of the PNA. TotalCommander will load after this.
j.. Now browse to the "\windows\autostart"-folder and execute the
k.. The tasbar is now activated and shown as a thin grey line at the
bottom of the screen.
l.. Now browse to the storage card, using TotalCommander and start the
installation of the registry editor by doubleclicking the
"RegEdit.Jup_ARM.cab"-file from step 2. Again ignore the warning saying that
this release may not work on your device and finish the installation by
pressing the jog.
m.. The installed program can be found in the folder \Program files\PHM
n.. After starting the reg-editor localize HKEY_LOCAL_MACHINE\init
o.. Due to the reg-editor being developed for equipment with bigger
displays we have to work with tricks again: You cannot see the right half of
the displayed screen, but you are able to see the key-symbols and to
click/doubleclick them. The last symbel should be "Launch80" with
"ST.exe"-value - doubleclick it only for checking and leave edit-mode by
clicking on the cross in the upper-right corner.
p.. After making sure(!) you found the right key, single-click it (symbol
highlights in grey)
q.. Select "edit-delete" to delete the key and close the reg-editor.
Autostart-sequence is now deactivated.
r.. Now exchange again "cecmd.exe" und "MNAVDCE.EXE" to restore the
s.. Create a shortcut to "MNAVDCE.EXE" and move this shortcut into the
Post by GR
Cekaj, trazim - vidio sam neki dan howto na netu.
Post by CARNet
mogu se sppjit sa active syncom i vidim foldere na ureðaju...
ali sto dalje?!
Post by GR
MoŸe¹ se spojiti s Active Syncom preko USB-a ?
Post by Amaro
Navigaciju Silverguide 4000
prodajem za 900 kn
031 351 357
MAJOR ROADS OF WESTERN EUROPE
begin 666 wink.gif
M`````````````````````````"'Y! D(``@`+ `````/``\```6%("**0S 0
MQ:@B0. .L)&L06N>!*J,M0`/!\)A43 X2 *,X'# -#&+1 1!,#V="PR&D5!
M"#CFPF!@<!6*22%7:),3787#,3&@BC(X>MZ@* I9>6AR&!(1% @*95L,#XZ%
G$14B#7 ,6I>&$!8C$6B.$J 1$!<K$Q,.#0VB%ILK(A04%:PK(0`[